دایره المعارف تاسیسات برق (اطلاعات عمومی برق)
Surface mount technology, SMT includes:• SMT overview
Surface mount device , SMD, resistors are the most widely used electronic component. Every day many millions are used to produce the electronic equipment from cell phones to televisions and MP3 players, and commercial communications equipment to high technology research equipment.
SMD resistors are rectangular in shape. They have metallised areas at either end of the body of the SMD resistor and this enables them to make contact with the printed circuit board through the solder.
The resistor itself consists of a ceramic substrate and onto this is deposited a metal oxide film. The thickness, and the length of the actual film determines the resistance. In view of the fact that the SMD resistors are manufactured using metal oxide, means that they are quite stable and usually have a good tolerance.
SMD resistors come in a variety of packages. As the technology has moved forward so the size of the resistor packages has fallen. The main packages with their sizes are summarised below:
|Package style||Size (mm)||Size (inches)|
|2512||6.30 x 3.10||0.25 x 0.12|
|2010||5.00 x 2.60||0.20 x 0.10|
|1812||4.6 x 3.0||0.18 x 0.12|
|1210||3.20 x 2.60||0.12 x 0.10|
|1206||3.0 x 1.5||0.12 x 0.06|
|0805||2.0 x 1.3||0.08 x 0.05|
|0603||1.5 x 0.08||0.06 x 0.03|
|0402||1 x 0.5||0.04 x 0.02|
|0201||0.6 x 0.3||0.02 x 0.01|
It can be seen from the dimensions in Imperial measurements, that the package names correspond to the dimensions in hundredths of an inch. This an SMD resistor with an 0805 package measures 0.08 by 0.05 inches.
SMD resistors are manufactured by a number of different companies. Accordingly the specifications vary from one manufacturer to the next. It is therefore necessary to look at the manufacturers rating for a specific SMD resistor before deciding upon exactly what is required. However it is possible to make some generalisations about the ratings that might be anticipated.
Power rating: The power rating needs careful consideration in any design. For designs using SMDs the levels of power that can be dissipated are smaller than those for circuits using wire ended components. As a guide typical power ratings for some of the more popular SMD resistor sizes are given below. These can only be taken as a guide because they may vary according to the manufacturer and type.
|Package style||Typical Power Rating (W)|
|0402||0.0625 - 0.031 (1/16 - 1/32)|
Some manufacturers will quote higher power levels than these. The figures given here are typical.
Tolerance: In view of the fact that SMD resistors are manufactured using metal oxide film they available in relative close tolerance values. Normally 5%, 2%, and 1% are widely available. For specialist applications 0.5% and 0.1% values may be obtained.
Temperature coefficient: Again the use of metal oxide film enables these SMD resistors to provide a good temperature coefficient. Values of 25, 50 and 100 ppm / C are available.
SMD resistors are used in many designs. Their size not only means that they are suitable for compact circuit boards, and for automatic assembly techniques, but it also ahs the advantage that they perform well at radio frequencies. Their size means that they have little spurious inductance and capacitance. Nevertheless care has to be taken when calculating their power dissipation as they can only dissipate small levels of power. ..............
جذابیت های برق
در ستایش معماری
تکنیک های نورپردازی، مهندسی روشنایی
فکر اقتصادی، کارآفرینی
تکنولوژی های روز دنیا
504 لغت آیلتس IELTS(ضروری برای همه دانشجویان)
شرط پیشرفت+مدیریت زمان و انرژی
اطلاعات علمی ساده و خلاصه
خلاقیت های ناب ناب
کافه کتاب،فرهنگ و ادبیات
رسانه (ایران، بین الملل)
خنده های رنگی رنگی
دیدنی های تو دل برو
دیالوگ های ماندگار
وقایع و تصاویر تاریخی جذاب، گردشگری
ویرایش نشده ها
معرفی نویسنده و مدیر وبلاگ