تبلیغات
برق. قدرت. کنترل. الکترونیک. مخابرات. تاسیسات. - 24- IPچیست؟حفاظت نفوذ آب و گردوغبارIngress Protection

برق. قدرت. کنترل. الکترونیک. مخابرات. تاسیسات.

دایره المعارف تاسیسات برق (اطلاعات عمومی برق)

IP:International Protection حفاظت بین المللی استانداردی است بین 00 تا 68 که رقم یکان آن یعنی اعداد بین 0 تا 8 حفاظت در مقابل آب است و هر چه عدد آن بیشتر شود، آن وسیله الکتریکی بهتر در مقابل آب مقاوم می شود. مثلاً IP48 و IP58 و IP68 کاملاً در ضدّ آب هستند. رقم دهگان IP که اعداد بین 0 تا 6 هست، حفاظت در مکانیکی در مقابل فرو رفتن اجسام نوک تیز مثل پونز و میخ های کوچک و گرد و غبار می باشد. IPوسایل الکتریکی داخل حمام توسط قوانین نظام مهندسی IP44 تعیین شده و  IP وسایل الکتریکی کارواش ها و قصابی ها و کشتارگاه ها IP45 تعیین شده.  IPهای معروف دیگری که در صنایع بزرگ مثل نیروگاه بخار وجود دارد IP22 و IP54 و IP68 می باشد. بالاترین حفاظت را IP68دارد.



اولین رقم مشخص کننده درجه حفاظت:
0
حفاظت نشده

1
حفاظت در برابر اجسام بزرگتر از 50 میلی متر

2
حفاظت در برابر اجسام بزرگتر از 12 میلی متر

3
حفاظت در برابر اجسام بزرگتر از 2.5 میلی متر

4
حفاظت در برابر اجسام بزرگتر از1 میلی متر

5
حفاظت در مقابل گردوغبار




دومین رقم مشخص کننده درجه حفاظت:
0
حفاظت نشده

1
حفاظت در مقابل قطرات آب که به صورت عمودی به تابلو برخورد میکند

2
حفاظت در مقابل قطرات آب با زاویه کوچکتر از 15 درجه

3
حفاظت در مقابل قطرات آب با زاویه کوچکتر از 60 درجه

4
حفاظت در مقابل قطرات آب با زاویه بزرگتراز60 درجه

5
حفاظت در مقابل پاشیدن آب تحت فشار




به عنوان مثال برای تابلوهای فشار ضعیف یا نصب در فضای باز استاندارد 43 IPرا پیشنهاد میکند.

هر چه قدر حساسیت تابلو وتجهیز داخل آن افزایش یابد درجه حفاظت تابلو بیشتر می شود.

نویسنده: ایمان سریری


You may have noticed that some enclosed electrical components have an IP rating-for example, "IP67". Sometimes, a brief explanation of the rating is provided-for example, "IP67, Temporary Immersion". This technical brief provides an explanation of the IP rating system.

(Don't confuse IP rating with the IP designation indicating that a device, such as a switch or circuit breaker, is ignition protected.)

IP stands for Ingress Protection and indicates the degree of protection provided by an enclosure. The numbers following IP represent levels of sealing and can range from none at all (IP00) to protection against dust and continuous immersion in water (IP68). The table provides a description of the protection at each level.

IP Rating Chart
Download PDF

For example, consider an IP65 rating:

  • The rating's first digit, e.g. IP6_, means that the enclosure is dust tight
  • The second digit, e.g IP_5, relates to the ingress protection against water

Solids ingress protection Levels 5 and 6 are concerned with dust protection. Level 5 allows some dust to enter, but not enough to affect equipment operation. Level 6 is fully dust-tight. These tests are conducted in a dust chamber using fine talcum powder recirculated by a blower. Depending on the test requirements, a partial vacuum may be drawn through the enclosure. The vacuum tests are performed for a period of between two and eight hours, depending on how much air volume is drawn through the cabinet. The duration of the non-vacuum tests is eight hours.

IP water resistance varies from mild drip resistance, through sprays, jets, and total immersion. For spray Levels 3 and 4, the water is delivered by either an oscillating tube which looks like a garden sprinkler, or manually, by a handheld showerhead. The spray head passes 12.5 liters per minute. The enclosure being tested is exposed for at least three minutes, or in the case of a large unit, at least one minute for each square meter of surface as the spray head is slowly moved around.

For Levels 5 and 6, hose nozzles are used. The Level 5 exposure is at 12.5 liters/minute through a 6.3 mm (1/4 inch) nozzle. Level 6 is a higher pressure and flow test, using a 12.5 mm (1/2 inch) nozzle at a flow rate of 100 liters/minute. For both Levels 5 and 6, the hosing is conducted from a distance of 2.5 to 3 meters. Exposure time is three minutes.

For Levels 7 and 8 the enclosure is submerged in water. Level 7 tests water submersion for 30 minutes. The enclosure is dunked so that its bottom is 1 meter below the water surface, and its top is 0.15 meters below the surface. Level 8 is a special test where the performance level-in terms of duration and external water pressure (which is proportional to depth)-are agreed on by the vendor and the user.

The IP rating system was established by the International Electromechanical Commission (IEC), a worldwide organization for standardization. The object of the IEC is to promote International cooperation on all questions concerning standardization in the electrical and electronic fields. The IEC collaborates closely with the International Organization for Standards (ISO). IEC documents have the form of recommendations and are published in the form of standards, technical specifications, technical reports or guidelines.

A complete description of the IP ratings and associated tests is found in IEC Publication 529. Although these ratings were initially developed as a way to classify enclosures, they now provide engineers with a convenient, practical way to compare levels of sealing. This standard describes a system for classifying the degrees of protection provided by the enclosures of electrical equipment. The adoption of this classification system promotes uniformity in methods of describing the protection provided by the enclosure and in the tests to prove the various degrees of protection.

Look for a product's IP rating when making a purchase. The product's IP rating is your way of knowing that the product is protected from particles or dust or water that may be present in the environment where you install the product.


https://www.bluesea.com/resources/117

صفحات جانبی

نظرسنجی

    لطفاً نظرات خود را درمورد وبلاگ با اینجانب در میان بگذارید.(iman.sariri@yahoo.com)نتایج تاکنون15000مفید و 125غیرمفید. با سپاس


  • آخرین پستها

آمار وبلاگ

  • کل بازدید :
  • تعداد نویسندگان :
  • تعداد کل پست ها :
  • آخرین بازدید :
  • آخرین بروز رسانی :